Effect of Carbon–Carbon Double Bond Content on the Final Properties of Stereolithography 3D-Printed Parts from Vegetable Oil-Based, Acrylated Resins

W4415378762 · 수집 2026-10-04 18:16:49

T12570 Photopolymerization techniques and applications

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL 발행기관 피인용수 라이선스

추가 정보 초록

The increase in the demand for additively manufactured parts and the drive toward a sustainable economy with less environmental pollution has triggered the need for renewable materials for use in 3D printing. This study shows how the final properties of stereolythography (SLA) 3D-printed parts are affected by the number of carbon-carbon double bonds in vegetable oils used to prepare biobased free radical resins. The free radical resins developed in this study contain a minimum of 95 wt % biobased content and are readily polymerizable using a commercial SLA 3D printer. Two distinct vegetable oils, namely soybean and linseed oils, were epoxidized and then acrylated. The epoxidized, acrylated oils and their 50:50 (wt/wt) blend were used to demonstrate the influence of carbon-carbon double bond content on the final properties of SLA 3D-printed parts. The synthetic strategy adopted was successful and showed promise, leading to printed materials with good thermo-mechanical properties. More specifically, it is demonstrated herein that the degree of unsaturation of the oil has a direct impact on the tensile strength of parts printed via stereolithography, and that final properties can be tuned by blending resins prepared from different oils. Ultimately, parts printed with linseed oil displayed better properties than those printed with soybean oil.

본문 활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.