Effect of low temperature on mechanical properties and fracture behavior of 3D printed short carbon fiber reinforced polyether ether ketone composites (CF/PEEK)

W4415242111 · 수집 2026-10-04 18:16:49

T12570 Material Properties and Applications

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL PDF 열기 발행기관 피인용수 라이선스

추가 정보 초록

This study systematically analyzes the effect of low-temperature environments on the mechanical properties and fracture behavior of carbon fiber reinforced polyether ether ketone (CF/PEEK) composites printed using fused deposition modeling (FDM). The mechanical properties of FDM-printed CF/PEEK composites were tested at five ambient temperatures, with liquid nitrogen's low boiling point used for cooling. A regression model predicting tensile strength was developed based on experimental results and subjected to analysis of variance and significance tests. The results showed that the tensile strength of CF/PEEK composites significantly decreased with decreasing ambient temperature. At -175 °C, the tensile strength dropped to 12.83 MPa, a decrease of 84.3% compared to 25 °C. The elastic modulus first decreased and then increased across the temperature range. Scanning electron microscopy (SEM) was used to examine the low-temperature fracture behavior. The fracture mode shifted from ductile to brittle, and the interfacial bonding between fibers and the matrix weakened, contributing to the decline in the composites' tensile properties. These findings aim to enhance the understanding of CF/PEEK composites' performance in low-temperature environments, providing insights for their application in these conditions.

본문 활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.