The Response of Some Properties of (Al-Si-Mg) Alloy to Nano-Ceramic Materials’ Addition

W2894626257 · 수집 2026-10-04 18:15:40

T10377 Metal and Thin Film Mechanics

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL PDF 열기 발행기관 피인용수 라이선스

추가 정보 초록

Al-Si alloys which are widely used in engineering applications due to their outstanding properties can be modified for more enhancements in their properties. Current work investigated the ability of these alloys to be modified by casting them through the addition of nanoparticles. So, Multi-wall carbon nanotubes (CNT) and titanium carbide ceramic particles (TIC) with size of (20 nm) were added with different amounts started from (0.5 up to 3%) weight to cast alloy A356 that was considered to be the base metal matrix, then stirred with different speeds of (270, 800, 1500, 2150) rpm at 520 °C for one minute. The results showed change in microstructure’ shape of the casted alloys from the dendritic to spherical grains with increasing stirring speed. Also, EDX analysis confirmed the existence of CNT and TIC additions over inter-dendritic locations related to the affected area. However, the enhancement in the mechanical properties for both types of castings was gained at a weight of 2.5% and a stirring speed of 1500 rpm.&#x0D;

본문

PDF 본문 자동 추출 실패: [download] HTTP 404 Not Found (2026-10-06 01:45:11)

활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.