Organic Ring Oscillators with Sub‐200 ns Stage Delay Based on a Solution‐Processed p‐type Semiconductor Blend

W2223566018 · 수집 2026-10-04 18:12:22

T10623 Thin-Film Transistor Technologies

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL PDF 열기 발행기관 피인용수 라이선스

추가 정보 초록

High‐frequency ring oscillators with sub‐microsecond stage delay fabricated from spin‐coated films of a specially formulated small‐molecule/host‐polymer blend are reported. Contacts and interconnects are patterned by photolithography with plasma etching used for creating vias and removing excess material to reduce parasitic effects. The characteristics of transistors with 4.6 μm channel length scale linearly with channel width over the range 60–2160 μm. Model device parameters extracted using Silvaco's Universal Organic Thin Film Transistor (UOTFT) Model yield values of hole mobility increasing from 1.9 to 2.6 cm 2 Vs −1 as gate voltage increased. Simulated and fabricated V gs = 0 inverters predict that the technology is capable of fabricating 5‐stage ring oscillators operating above 100 kHz. Initial designs operated mainly at frequencies in the range 250–300 kHz, due to smaller parasitic gate overlap capacitances and higher supply voltages than assumed in the simulations. A design incorporating graded inverter sizes operates at frequencies above 400 kHz with the best reaching 529 kHz. The corresponding stage delay of 189 ns is the shortest reported to date for a solution‐processed p‐type semiconductor and compares favorably with similar circuits based on evaporated small molecules. Significant further improvements are identified which could lead to the fabrication of digital circuits that operate at much higher bit rates than previously reported.

본문

PDF 본문 자동 추출 실패: [download] HTTP 403 Forbidden (2026-10-04 23:27:16)

활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.