Response surface and artificial neural network prediction model and optimization for surface roughness in machining

W2143664202 · 수집 2026-10-04 18:12:21

T13049 Surface Roughness and Optical Measurements

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL 발행기관 피인용수 라이선스

추가 정보 초록

The present paper deals with the development of prediction model using response surface methodology and artificial neural network and optimizes the process parameter using 3D surface plot.The experiment has been conducted using coated carbide insert in machining AISI 1040 steel under dry environment.The coefficient of determination value for RSM model is found to be high (R 2 = 0.99 close to unity).It indicates the goodness of fit for the model and high significance of the model.The percentage of error for RSM model is found to be only from -2.63 to 2.47.The maximum error between ANN model and experimental lies between -1.27 and 0.02 %, which is significantly less than the RSM model.Hence, both the proposed RSM and ANN prediction model sufficiently predict the surface roughness, accurately.However, ANN prediction model seems to be better compared with RSM model.From the 3D surface plots, the optimal parametric combination for the lowest surface roughness is d1-f1-v3 i.e. depth of cut of 0.1 mm, feed of 0.04 mm/rev and cutting speed of 260 m/min respectively.

본문 활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.