Experimental Study on Dry Friction Damping Characteristics of the Steam Turbine Blade Material with Nonconforming Contacts

W2019986366 · 수집 2026-10-04 18:12:19

T11062 Gear and Bearing Dynamics Analysis

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL PDF 열기 발행기관 피인용수 라이선스

추가 정보 초록

An experiment system has been established to study the dry friction damping dynamic characteristics of the steam turbine blade material 1Cr13. The friction dynamic characteristics of the specimens with nonconforming contact surfaces are measured under different parameters. The experiment results are compared with that of the macroslip hysteresis model and the Mindlin microslip friction model in detail. The results show that the experimental result of the tangential contact stiffness is in good agreement with that of the theory result based on the fractal theory and the Hertz contact theory by Jiang et al., 2009. The dimensionless equivalent stiffness and equivalent damping obtained by the macroslip hysteresis model agree well with the experimental results when relative motion is relatively large. However, the results of the macroslip hysteresis model differ a lot from the experimental results when relative motion is relatively small. Compared with the macroslip hysteresis model, the Mindlin microslip friction model can predict the dimensionless equivalent stiffness and equivalent damping accurately during the whole measurement range. The linear regularities of dimensionless equivalent stiffness and equivalent damping are obtained, which decrease the difficulty of building the vibration analysis model of the blade with sufficient accuracy.

본문

PDF 본문 자동 추출 실패: [download] HTTP 403 Forbidden (2026-10-04 21:28:41)

활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.