Synergetic Enhancement of Device Efficiency in Poly(3-hexylthiophene-2,5-diyl)/[6,6]-phenyl C<sub>61</sub>Butyric Acid Methyl Ester Bulk Heterojunction Solar Cells by Glycerol Addition in the Active Layer

W2009389624 · 수집 2026-10-04 18:12:18

T10660 Conducting polymers and applications

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL PDF 열기 발행기관 피인용수 라이선스

추가 정보 초록

Poly(3-hexylthiophene-2,5-diyl)(P3HT):[6,6]-phenyl-C61-butyric acid methyl ester (PC 60 BM) is the widely used active layer for the bulk heterojunction solar cells. Annealing is essential for P3HT:PC 60 BM active layer, since it facilitates the creation of better network for the transfer of the charge carriers. However, the PC 60 BM in the active layer can crystallize excessively during annealing treatments and disrupt the favorable morphology by forming crystallites in micrometer ranges, thus reducing device efficiency. In this paper we used glycerol as an additive in the active layer. Due to high boiling point of glycerol, it makes slow drying of the active layer possible during the annealing. It thus gives enough time to both electron donor (P3HT) and electron acceptor (PC 60 BM) components of the active layer to self-organize and also restrict the crystal overgrowth of PC 60 BM. Further, the glycerol additive makes the active layer smoother, which may also improve adhesion between the electrode and the active layer. The devices with the pristine active layer showed a power conversion efficiency (PCE) of about 2.1% and, with the addition of 30 vol% of glycerol in the active layer, the PCE value increased to 3%.

본문

PDF 본문 자동 추출 실패: [download] HTTP 403 Forbidden (2026-10-04 21:22:07)

활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.