Rapid Fabrication of Periodic Patterns on Poly(styrene-co-acrylonitrile) Surfaces Using Direct Laser Interference Patterning

W1978498533 · 수집 2026-10-04 18:12:18

T10313 Laser Material Processing Techniques

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL PDF 열기 발행기관 피인용수 라이선스

추가 정보 초록

Periodic microstructures in styrene-acrylonitrile (SAN) copolymers are fabricated by two-beam direct laser interference patterning using a nanosecond pulsed laser operating at a wavelength of 266 nm. The SAN copolymers are synthesized using different molar ratios (styrene to acrylonitrile) by a free radical polymerization process. The chemical composition of the copolymers and their properties are determined using Fourier transformed infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). Depending on the composition of the irradiated copolymer films, with weight ratios ranging from 58 to 96.5% of styrene to acrylonitrile, different ablation behaviors are observed. The laser fluence necessary to locally ablate the copolymer is found to be dependent on the copolymer composition. Unlike other dielectric polymers, the laser irradiation produced both direct ablation of the irradiated material and collapse of the surface. It is shown that, by varying the laser fluence and the copolymer composition, the surface structure can be changed from a periodic pattern with a swelled topography to an ablated-like structure. The number of holes does not depend monotonically on the amount of PS or PAN units but shows a more complex behavior which depends on the copolymer composition and the laser fluence.

본문

PDF 본문 자동 추출 실패: [download] HTTP 403 Forbidden (2026-10-04 21:06:13)

활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.