An Experiment Investigation of Film Cooling Effectivenes of Sister Hole of Cylindrical Shaped Hole Film Cooling Geometry on a Flat Plate Surface

W1854004406 · 수집 2026-10-04 18:12:17

T11138 Tribology and Lubrication Engineering

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL PDF 열기 발행기관 피인용수 라이선스

추가 정보 초록

Gas turbines are widely used nowadays for aircraft propulsion and in land-based power generation or in the industrial application. The operating temperature of gas turbine has to be increased in order to increase their effectiveness. Thus, a cooling method known as film cooling is introduced to cool down the high operating temperature of the gas turbine. Film cooling is one of the effective methods in reducing the heat load to a turbine airfoil. This method is cost effective and by far the most common and widely researched method in the industry. Film cooling effectiveness plays a vital role in modern gas turbine technology. This present study will focus on sister holes that are attached to the primary holes at shallow angle of 30°, with 4 different blowing ratios ranging from 0.5 to 2.0. The roles of the different in blowing ratios are to observe the different values of film effectiveness presented by the sister holes design and to select the most effective blowing ratio that suits the design at shallow angle. From the results obtained, the usage of sister holes with shallow angle further increases the film cooling effectiveness particularly at low blowing ratio.

본문

PDF 본문 자동 추출 실패: [download] HTTP 403 Forbidden (2026-10-04 20:38:11)

활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.