Deformation behavior of an electrodeposited nano-Ni/amorphous Fe78Si9B13laminated composite sheet

W1700340587 · 수집 2026-10-04 18:12:15

T11523 Nanomaterials and Printing Technologies

CoT 라벨링

라벨링 전

PDF 파일

저장된 PDF 없음

기본 정보

DOI 제목 발행년도 저널 URL 페이지 열기 PDF URL PDF 열기 발행기관 피인용수 라이선스

추가 정보 초록

A nano-Ni/amorphous Fe78Si9B13 composite sheet was prepared in the form of three-ply (Ni-Fe78Si9B13-Ni) laminated structure by an electrodeposition method. The average grain size of Ni layers is about 50 nm. The interface of laminated composite was investigated with SEM equipped with energy dispersive scanning (EDS) and line analysis technique. The laminated composite has a good interfacial bonding between amorphous layer and nano-Ni layers due to the mutual diffusion of atoms in Fe78Si9B13 and Ni layers during the process of electrodeposition. A maximum elongation of 115.5% was obtained when the volume fraction of nano-Ni layers (VNi) was 0.77, which is greatly higher than that of monolithic amorphous Fe78Si9B13 ribbon (36.3%) tested under the same conditions. Bulging tests were carried out to evaluate plastic forming properties of the Fe78Si9B13/Ni laminated composite. Under the condition of 450 °C, 4.0 MPa and 30 min, a good bulging part with the relative bulging height (RBH) of 0.4 was obtained.

본문

PDF 본문 자동 추출 실패: [download] HTTP 403 Forbidden (2026-10-04 20:20:07)

활용가능성

이력 0건

아직 편집 이력이 없습니다. 저장할 때마다 이전 내용이 여기에 백업됩니다.

Deformation behavior of an electrodeposited nano-Ni/amorphous Fe<sub>78</sub>Si<sub>9</sub>B<sub>13</sub>laminated composite sheet

CoT 라벨링

PDF 파일

이력 0건